Artificial Bamboo Blinds

1. Bamboo Blinds Stock Photos, Pictures & Royalty Free Images
2. Surprising Ways To Reuse Old Bamboo Blinds
   1. Diy Bamboo Shades For The Layered Window
   2. Quilt Cover Curtains…and A Faux Bamboo Blind
3. Bamboo Shades, Custom Bamboo Shades, Bamboo Shades Installation
4. Amazon.com: Outdoor Cordless Bamboo Window Shades, Waterproof Wood Roller Blinds With 6 Inches Valance, Light Filtering Roller Shades Window Blinds For Patio, Doors, Porch, Balcony, Gazebo, Pergola,deck Color2

Posted by The Painted Hive | Nov 24, 2014 | Before & After, Charlotte's Room, DIY, How To, My Hive, Soft Furnishings, Window Treatments | 34

I know that probably sounds stupid (I mean, it’s just ‘stuff’ after all) though as a budget-concious DIY decorator with a decidedly fickle streak I think it’s the fear of expending a fair amount of both cash and time on something only to tire of it after five minutes – not to mention the ridiculous dread of getting it just plain wrong in the first place!

I’m sure some of you probably feel the same way, and, like me, wish that maybe you didn’t, because as much as I adore the timeless appeal of my go-to ‘subtles’ there’s no denying the energy and impact a striking pattern can impart. Which is why I decided to step outside my comfort zone with this window treatment project for Charlotte’s room.

Affordable Bamboo And Woven Wood Blinds

Despite my instant love however, I never intended using anything from the actual range. You see, aside from the fact it was already discontinued, it was never even sold here in Australia (and even if it had been I’m betting it wouldn’t have been cheap). So, I decided instead to go on one of my relentless (and in no way obsessive :-) quests for something similar. I was concentrating on sourcing affordable vintage sheets which could be repurposed into curtain panels and after a few months of fruitless searching, guess what I just happened to stumble across on eBay? Yup, an

Although a little more than I was intending to spend, at $80 (plus $20 for international shipping) I couldn’t say no. The best thing was I also discovered that the quilt cover was actually double-sided – same beautiful fabric front and back! – and based on my calculations one side alone was all I needed to create my pair of curtains. Soooo, I really only used half of the quilt cover which means that technically each curtain panel cost me just $20 – and, as a bonus, I have a whole “sheet” of that gorgeous fabric remaining!

I always intended using the curtains purely for decorative purposes so of course needed something functional to accompany them. I settled on my go-to of an inexpensive block-out roller blind concealed by a faux bamboo roman shade (a pretty yet practical combination I  also used in my master bedroom and my parent’s bedroom). Anyhoo, here’s how the whole project went down…

Bamboo Blinds Stock Photos, Pictures & Royalty Free Images

Just as a note, the window I worked with for this project is a standard-sized floor to almost ceiling (180cm wide x 210cm high). There is also an external blind (which you can see in some of the photos) as this is a westerly facing room which can get super hot in summer.

This is what forms the functional component of the window dressing, helping control light (and temperature, to some extent). I like using roller blinds because they are effective, easy to operate, slim and discreet and generally really affordable. I picked-up this basic block-out roller blind (just $20 on sale from Spotlight) and mounted it just above the window frame.

Prices for roller blinds can vary dramatically. For a project like this where the entire thing is concealed, there’s nothing wrong with using a low-end version. I find the basic functionality is completely comparable. Of course, if you don’t have standard sized windows then buying off-the-shelf might not be an option. I considered using a textured roller blind (so I could forgo the bamboo valance) though I couldn’t find any suitable ready-made options and the price for a custom blind was super expensive. I also toyed with the idea of topically covering my cheap roller blind with a textured fabric or wallpaper, though decided against it. Maybe that’s something for a future project.

Surprising Ways To Reuse Old Bamboo Blinds

This is really just a valance imitating a bamboo shade. It does double duty by concealing the roller blind and instilling some lovely natural warmth and texture. It also hides the external blind from view when inside the room. To create this valance, I first mounted a basic curtain rod ($10 from Spotlight) just above the roller blind (making certain the brackets were deep enough to comfortably clear it).

I then simply cut an inexpensive matchstick blind ($35 from Bunnings) in half horizontally, removed a few of the “sticks”, re-tied the strings (this is why I needed to remove a few sticks, to give enough slack to re-tie the strings) then wrapped and draped one half over the rod until I was happy with the look.

Note: I played around with using the upper half of the blind complete with the solid length of mounting timber though couldn’t get it to look and work as I wanted. If you plan to use the upper half, I recommend removing the mounting plank.

Diy Bamboo Shades For The Layered Window

My valance is merely balancing on the rod though it’s incredibly stable (I’ve had this exact treatment in my master bedroom for over three years and the bamboo has never budged). You could use some clear string or thin wire to secure it if you like.

The above pic shows the blind only partially lowered for photographic purposes. Obviously it can be lowered all the way to the floor.

You might be wondering why I didn’t just forgo the roller blind and valance and use a real bamboo shade in their place. This does seem to make sense though I needed something with block-out capabilities and most bamboo shades are merely light filtering. This limited my options somewhat, though more than that, given the width of my window a bamboo block-out blind would have been extremely heavy to operate (and using two, with alternate string sides, would have required customisation – pricey). Charlotte likes opening her blind in the mornings and simply wouldn’t have been able to lift a big timber one. Also, they are pretty expensive. The cheapest ones I came across were more than double the price of my combined roller and valance alternative!

Quilt Cover Curtains…and A Faux Bamboo Blind

These lovely, bold botanical drapes are the real statement component of this window dressing. From a cosmetic perspective they add pretty vibrance whilst concealing the ends of the valance and plastic cord of the roller. From a functional perspective, although they are essentially “dummy drapes”, they help filter excess light which creeps in from the sides of the roller, making the room even darker (and they can be closed too if need be).

From the beginning I had envisioned using a natural bamboo pole though unfortunately I couldn’t find a long enough one which didn’t taper down considerably (like, to pencil thinness) at one end. I eventually decided to simply cut two bamboo poles in half then connect the fatter ends together (bamboo poles are super cheap from hardware stores and garden centers). To join the halves I pumped some clear expanding glue into each natural hollow then inserted a 50cm length of dowel and forced the ends together – it’s important to use a relatively long dowel to give the joint structural integrity otherwise it may bow. This created one long, strong pole with a nice even girth and because I had cut and connected both ends at the point of a node the join is invisible. I mounted my pole quite close to the ceiling on basic cream brackets deep enough to clear the valance. For a finishing touch I added some small timber finials ($4 each from eBay – the ones I used are no longer available sorry though drawer knobs are a good alternative) and painted the visible ends of the brackets to co-ordinate with the bamboo pole.

To transform my quilt cover into two curtain panels I first trimmed off the end section (where the buttons and holes were) then separated the front and back to give me two clean “sheets” of fabric (as mentioned above, one sheet was all I needed for both of my drapes so I  simply set one aside for use in future projects – awesome!).

Bamboo Shades, Custom Bamboo Shades, Bamboo Shades Installation

I then hemmed the top and checked the length only to discover they were marginally short. Not to worry though. I had anticipated this and already pre-planned to add some simple natural linen I already owned as lengthening base trim if need be. This is not only an easy fix though also provides a nice bespoke detail. I simply added the trim during the remaining hemming process.

In this pic the base looks a little wonky though it’s just the camera angle and wave of the curtain. It was kinda hard to photograph given it’s practically behind the bed!

Convention) by doing something that was slightly conventional (say what?). I used actual proper curtain gathering tape and hooks (super cheap from IKEA) and antique bronze rings ($15 for twenty on sale from Spotlight).

Amazon.com: Outdoor Cordless Bamboo Window Shades, Waterproof Wood Roller Blinds With 6 Inches Valance, Light Filtering Roller Shades Window Blinds For Patio, Doors, Porch, Balcony, Gazebo, Pergola,deck Color2

Gathering tape is more commonly associated with tailored pleats though can also be used to form the more casual ripples I went with. I sewed my tape on though you could simply use fusible webbing.

You might be wondering why I didn’t just use block-out drapes and forgo the roller blind and bamboo valance? Well, I don’t really love the way block-out drapes hang. I